Product Benefits

  • Tested on the three criteria in Zone 4 of the French Health Standard NF S90-351: 2013 
  • Cleaning: five cleaning methods 
  • Acoustic absorption: αw = 0.90
  • Reaction to fire: A1
  • 100% flat irrespective of the Relative Humidity
  • Painted edges and visible face
  • High density panel

Caracteristics & Performance

Acoustic absorption

Clini'Safe® E 15
  • αw = 0.90 : class A / NRC = 0.90

Light reflexion

  • The light reflection coefficient of the veil is superior to 85%.

Fire reaction

  • According to EN 13501-1: Euroclass A1.

Humidity performance

  • 100% flat irrespective of the Relative Humidity.

Performance in Healthcare establishments

  • Clini'Safe® E 15 ceilings satisfy microbiological requirements for type 4 and 3 Zones:
Areas Control of airborne particles Kinetics of particle decontamination Microbiological cleanliness Tested strains
4 CP5 M1 Escherichia coli, Klebsiella pneumoniae, Aspergillus niger and Candida albicans
3 CP5 M10 Acinobacter baumannii, Bacillus cereus, Streptococcus pneumoniae and methicillin-resistant Staphylococcus aureus (SARM)


Environment and health


  • Mineral wool is recyclable, and the vast majority of production waste is recycled. The recycled content of the mineral wool of  our Clini'Safe® E 15 panels is 45%.
  • For projects based on LEED®, BREEAM® and HQE™ Green Building certifications, EPD (Environmental Product Declarations) are available. Contact us.
  • Eurocoustic is certified to ISO 14001: 2015 "Environmental Management Systems".


  • Eurocoustic stone wool is certified by EUCEB (EUropean CErtification Board for mineral wool product).
  • Stone wool panels are manufactured with fibers exempt from the carcinogenic classification (European Regulation 1272/2008 as amended by European Regulation 790/2009). According to the International Agency for Research on Cancer, mineral wool is not classifiable as to its carcinogenicity to humans (Group 3).

CE Marking

  • DoP no.: G008.

Indoor Air Quality

  • Clini'Safe® E 15 products are classed A.

Installation & Cleaning


  • Installation must conform to the requirements of the DTU 58.1 code of practice, the NF P 68203-1 and 2 standards and other applicable standards and codes of practice according to the type of room.
  • You are advised to ensure that air can circulate between the rooms and the plenum to balance the temperature and pressures on each side of the ceiling.
  • Clini'Safe® E 15 ceilings are fitted on T15 - T15 hollow joint - T24 grids.
  • Tiles can be cut with a craft knife without generating any noise or dust.
  • The direction in which the panels should be installed is indicated on the back of the panels.
  • Contact us if any mineral wool is to be laid in the plenum.


  • The painted surface of Clini'Safe® E 15 ceilings does not retain dust, which makes them easier to clean.
  • Clini'Safe® E 15 ceilings can be cleaned using light brush, vacuum cleaner, compressed air, wet sponge (with or without detergent / disinfectant), wet steam + dry cloth.
  • Clini'Safe® E 15 ceilings are resistant to the most widely used disinfectants in hospitals, with a base of: hydrogen peroxide, chlorine dioxide and glutaraldehyde.
  • This type of cleaning will help extend the service life of Clini'Safe® E 15 ceilings.

Colors & Dimensions


Our commitments

Fast and flexible logistics, technical assistance, customer service: Saint-Gobain Eurocoustic accompanies you on your projects on a daily and long-term basis.

Read more


Since July 1, 2013, the manufacturer has indicated the CE marking on its products and provided Declarations of Performance (DoP) in pursuance of the Construction Products Regulation.
The declaration of performance expresses the performance of construction products in relation to the essential characteristics of those products in accordance with the relevant harmonized technical specifications. Declarations include the following performance characteristics:

  • Reaction to fire
  • Release of formaldehyde
  • Flexural strength
  • Acoustic absorption coefficient (αw)
  • Thermal conductivity

The Declaration of Performance (DoP) alone provided by the manufacturer is sufficient evidence of the fire reaction performance of our products and can be used in place of the fire classification test reports.