Tonga® A 40
Tonga® A 40 ceiling offers an excellent sound absorption, fire resistance and benefits of 280 combinations of formats and colors. Ideals for all types of room.
• Acoustic absorption: αw = 1.00
• 280 combinations of formats and colors
• Resistance to bending : C/90N/m²
• Cradle to Cradle® certified Bronze v4.0
Characteristics
Acoustic Absorption
αw=1 classe=A NRC=1
αp, Practical sound absorption coefficient
Frequency Hz
Visual Appearance
| Property | White 09 |
|---|---|
| Light Reflectance (LRV%) | 87% |
| Whiteness (L*) | 94% |
| Gloss (85°) | 1.2 |
Fire Reaction
| Standard | White 09, EuroColors, EuroDesign | Silver M5 |
|---|---|---|
| EN 13501-1 | Euroclass A1 | Euroclass A2-s1,d0 |
Fire Resistance
| Standard | Classification | Size | Load-bearing structures | Additional insulation |
|---|---|---|---|---|
| EN 13501-2 | REI 30 | 600x600x40 | Concrete, Steel | - |
| EN 13501-2 | REI 30 | 600x600x40 | Concrete, Steel, Timber | 160 mm Eurolène® 603 |
| NBN 713-020 | SF 30 | 600 to 1200 x 600x40 | Concrete, Steel | - |
| NBN 713-020 | SF 30 | 600 to 1200 x 600x40 | Concrete, Steel, Timber | 160 mm Eurolène® 603 |
See respective classification reports for detailed information on installation and suspension system requirements.
Humidity Resistance
100% flat irrespective of the Relative Humidity.
Mechanical Properties
According to EN 13964 - Annex F, Tonga® A 40 ceilings are classified as C/90N/m² for dimensions 600 x 600 / 1200 x 600 / 1200 x 1200 mm. This value should be kept in mind if any mineral wool is to be laid in the plenum.
Implementation and maintenance
Installation
| • You are advised to ensure that air can circulate between the rooms and the plenum to balance the temperature and pressures on each side of the ceiling. |
| • Tiles can be cut with a craft knife without generating any noise or dust. |
| • The direction in which the panels should be installed is indicated on the back of the panels. |
| • Contact us if any mineral wool is to be laid in the plenum. |
Cleanability
The ceiling surface does not retain dust, which makes the panels easier to clean. The ceiling can be cleaned using a light brush or a vacuum cleaner. This type of cleaning will help extend the service life of the ceilings.
Certifications
Material Health
| C2C Certified Material Health Certificate™ | This product has received a C2C Certified Material Health Certificate™ at the Bronze level (standard version 4.0). The C2C Certified Material Health Certificate™ is a verification of the health and safety of a product’s composition using the Material Health requirements of the Cradle-to-Cradle Certified Product Standard. |
| EUCEB | Eurocoustic panels are manufactured using mineral wool certified by the European Certification Board for mineral wool products (EUCEB), which independently confirms that mineral wool is produced in conformity with the Note Q of European Regulation (EC) No 1272/2008 and therefore classification as a carcinogen does not apply. |
| REACH | Eurocoustic products comply with the REACH regulation of the European Chemicals Agency and therefore do not contain any Substances of Very High Concern (SVHC) with potential negative impacts on human health or the environment above 100ppm. |
Circularity
| Minimum recycled content | 25% |
| Recyclability | Fully recyclable |
Ce Markings
Eurocoustic ceilings are CE marked according to the European harmonized standard EN13964:2014. CE marked construction products are covered by a Declaration of Performance (DOP) which enables customers and users to easily compare performance of products available on the European market.
Cradle to cradle
This product is Cradle to Cradle Certified® at Bronze level (version 4.0).
Indoor Air Quality
| Certificate / Label | |
|---|---|
| French VOC | A+ |
| Eurofins | Indoor Air Comfort® Gold |
Carbon Footprint
| kg CO₂ equiv/m² | |
|---|---|
| Tonga A 40 | 5.11 |
Life cycle stages A1 to C4 of the EPD, in compliance with ISO 14025 / EN 15804.
Colors
colors
Blanc 09
|
NCS
eurocolors
Noir / V7
|
NCS
S 8500-N 3%
Cobalt / V3
|
NCS
S 8010-R70B 5%
Ardoise / V1
|
NCS
S 8005-B 6%
Météorite / V6
|
NCS
S 7020-B10G 5%
Saphir / G6
|
NCS
S 5040-B30G 11%
Topaze / G8
|
NCS
S 3050-B 20%
Turquoise / G9
|
NCS
S 2055-B10G 25%
Céladon / T1
|
NCS
S 4040-B60G 20%
Lave / V5
|
NCS
S 7020-Y60R 8%
Basalte / V2
|
NCS
S 7005-Y80R 10%
Fer / V4
|
NCS
S 7010-G70Y 12%
Plomb / M4
|
NCS
S 6005-B 14%
Outremer / T4
|
NCS
S 4020-R80B 21%
Zinc / M6
|
NCS
S 5500-N 20%
Granite / M3
|
NCS
S 4502-G50Y 28%
Emeraud / G2
|
NCS
S 2070-G40Y 28%
Terre / D6
|
NCS
S 4502-Y50R 31%
Silex / T6
|
NCS
S 4005-G80Y 31%
Cuivre / T2
|
NCS
S 4020-Y90R 18%
Sienne / T5
|
NCS
S 3560-Y80R 11%
Iceberg / P5
|
NCS
S 1510-R80B 55%
Glacier / P4
|
NCS
S 2010-B 46%
Aluminium / M1
|
NCS
S 2502-B 51%
Dune / D4
|
NCS
S 3010-Y20R 36%
Chrome / M2
|
NCS
S 2500-N 49%
Silver / M5
|
NCS
S 2502-B 51%
Ambre / G1
|
NCS
S 2570-Y60R 14%
Givre / P3
|
NCS
S 1510-G20Y 59%
Calcaire / D2
|
NCS
S 2005-Y40R 48%
Argile / D1
|
NCS
S 2002-Y20R 60%
Jade / G4
|
NCS
S 1040-G50Y 49%
Ocre / T3
|
NCS
S 2060-Y10R 38%
Sable / D5
|
NCS
S 1505-Y30R 63%
Rosée / P6
|
NCS
S 1505-Y80R 60%
Crépuscule / P2
|
NCS
S 1510-Y40R 60%
Grenat / G3
|
NCS
S 1080-R 16%
Rubis / G5
|
NCS
S 1085-Y90R 12%
Soufre / G7
|
NCS
S 1070-Y10R 47%
Banquise / P1
|
NCS
S 1015-Y 65%
Craie / D3
|
NCS
S 0601-G 81%
eurodesign
Bayadère Calcaire | B2
|
NCS
Pattern represented on a 1:10 scale
Ombelle Ardoise | O1
|
NCS
Pattern represented on a 1:25 scale
Bayadère Aluminium | B1
|
NCS
Pattern represented on a 1:10 scale
Ombelle Dune | O2
|
NCS
Pattern represented on a 1:25 scale
Cubes Zinc| C2
|
NCS
Pattern represented on a 1:25 scale
Cubes Noir | C1
|
NCS
Pattern represented on a 1:25 scale